SPOOLOGIC Exhaust Manifold Stud Spacer and Nut Kit with Up-Pipe Mounting Studs

The SPOOLOGIC SL-320-062 Exhaust Manifold Stud Spacer and Nut Kit with Up-Pipe Mounting Studs supplies genuine Ford OEM hardware for both exhaust manifolds and both manifold-to-up-pipe connections on 2011–2019 Ford F-250 F-350 F-450 F-550 trucks with the 6.7L Powerstroke engine.

Features

• Genuine Ford OEM studs, spacers and nuts
• Hardware for both exhaust manifolds and both up-pipe connections
• Short and long manifold studs with their corresponding spacers

What’s Included

• 12 short exhaust manifold studs — Ford OEM W715713-S900
• 4 long exhaust manifold studs — Ford OEM W717172-S900
• 12 short exhaust manifold spacers — Ford OEM BC3Z-00810-A
• 4 long exhaust manifold spacers — Ford OEM FC3Z-00810-A
• 16 exhaust manifold mounting nuts — Ford OEM W701706-S430
• 6 manifold-to-up-pipe studs — Ford OEM W716425-S900
• 6 manifold-to-up-pipe nuts — Ford OEM W711402-S900

Fitment

• 2011-2019 Ford F-250 F-350 F-450 F-550 6.7L Powerstroke

⚠️ 2011–2014 applications: Ford SSM 50330 specifies replacing the manifold on the side with a broken stud. When replacing cylinder 4 and/or 8 studs, replace both studs and install new spacers and heat shields on the affected side(s). This kit includes the revised studs and spacers; manifolds, heat shields and gaskets are sold separately. Follow Ford SSM 50330.

Installation Notes

Follow the applicable vehicle service procedure and tightening specifications. Start the hardware by hand and tighten in the specified sequence.

1-Year Limited Warranty

Every SPOOLOGIC Exhaust Manifold Stud Spacer and Nut Kit with Up-Pipe Mounting Studs carries a 1-Year Limited Warranty against defects in materials and workmanship for the original purchaser from the original purchase date. Coverage excludes damage caused by incorrect torque, cross-threading, reuse of stretched or damaged fasteners, improper installation, or use outside the listed application. Claims require dated proof of purchase. Contact SPOOLOGIC for return authorization before shipping the component for inspection. If inspection confirms a covered defect, SPOOLOGIC will replace the covered component. Customers pay warranty shipping in both directions; labor and related costs are not covered. See the SPOOLOGIC Warranty Policy for full terms.