SPOOLOGIC Turbo Gasket Kit

The SPOOLOGIC SL-310-010 Turbo Gasket Kit combines the turbo pedestal oil seals and compressor outlet O-ring for Late 1999–2003 Ford 7.3L Powerstroke applications. Use this set when removing the turbocharger and pedestal or repairing leaks at the included sealing connections.

Features

• Four yellow pedestal O-rings: two large and two small
• Black turbo-to-spider outlet seal
• Replacement seals for both upper and lower pedestal oil connections
• Five-piece turbo seal set

Sealing and Service

The pedestal seals contain engine oil at the engine-to-pedestal and pedestal-to-turbocharger joints. The larger spider O-ring seals pressurized air at the compressor outlet. Replacing these seals during removal gives each opened connection a fresh sealing surface. Inspect the surrounding components to confirm the leak source before starting the repair.

What's Included

• 4 Yellow Turbo Pedestal O-Rings: 2 large and 2 small — Turbo Pedestal Yellow O-Ring Set — SL-310-001
• 1 Black Turbo-to-Spyder O-Ring — SL-310-003

Fitment

• Late 1999–2003 Ford F-250 F-350 F-450 F-550 Super Duty 7.3L Powerstroke
• 2000–2003 Ford Excursion 7.3L Powerstroke

Installation Notes

• Application: Match the kit to the installed turbocharger and spider configuration.
• Preparation: Clean the seal grooves and mating surfaces.
• Pedestal seals: Install one large and one small O-ring at each pedestal connection.
• Assembly: Keep the seals seated without twisting or pinching them.
• Tightening: Follow the factory torque specifications and check for leaks.

OEM Cross-References

• Ford: F4TZ-6N653-A / F4TZ6N653A — pedestal seal
• Ford: F4TZ-6N653-B / F4TZ6N653B — pedestal seal
• Ford: F81Z-9E436-AA / F81Z9E436AA — compressor outlet seal

These references identify individual sealing components. They do not identify a complete OEM kit.

1-Year Limited Warranty

This SPOOLOGIC gasket set carries a one-year limited warranty against defects in materials and workmanship from the original purchase date. Contact SPOOLOGIC for return authorization before sending the product for inspection. Approved defective gaskets will be replaced at SPOOLOGIC’s discretion. The customer is responsible for all warranty shipping charges. Damage from improper installation, incorrect application, contamination, or normal wear is not covered. Labor, removal, reinstallation, towing, and downtime are excluded, subject to applicable law. See the SPOOLOGIC Warranty Policy for complete terms.