SPOOLOGIC Heavy Duty 304SS High-Flow Bellowed Up-Pipe Kit

The SPOOLOGIC SL-510-010 Heavy Duty 304SS High-Flow Bellowed Up-Pipe Kit replaces the original exhaust up-pipes on 2011–2014 Ford Super Duty pickups and 2011–2016 Super Duty chassis cab trucks with the 6.7L Powerstroke. The kit combines 2-inch 304 stainless steel tubing, internally sleeved expansion bellows, and welded flange connections to carry exhaust from the manifolds to the turbocharger. Both pipes are supplied with new manifold gaskets, mounting studs, retaining nuts, and turbo-side clamps.

Features

• 2-inch 304 stainless steel tubing with a raw stainless finish
• Internally sleeved bellows accommodate thermal expansion and contraction
• TIG-welded pipe and flange construction
• Three-bolt manifold flanges and turbo-side V-band connections
• Passenger-side connection for the factory exhaust backpressure sensor tube
• Supplied gaskets, studs, nuts, and V-band clamps

⚠️ Fitment Notes

For 2011–2014 Super Duty pickups and 2011–2016 Super Duty chassis cab trucks with the original turbocharger and exhaust manifold configuration. Does not fit 2015–2019 pickups or 2017–2019 chassis cab trucks.

Bellowed Up-Pipe Design

Up-pipes carry exhaust from both exhaust manifolds to the turbocharger turbine inlet. Cracked tubing, damaged bellows, or leaking connections allow exhaust energy to escape before reaching the turbine, which can reduce boost and slow turbo response. The SPOOLOGIC bellowed design allows the pipes to expand and contract through repeated heat cycles while reducing stress on the connections. Replacing leaking up-pipes can restore lost performance; results depend on the condition of the original system and the rest of the engine.

What's Included

• Driver-side SPOOLOGIC 304 stainless steel bellowed up-pipe
• Passenger-side SPOOLOGIC 304 stainless steel bellowed up-pipe
• Two up-pipe-to-exhaust-manifold gaskets
• Six up-pipe-to-exhaust-manifold studs
• Six up-pipe retaining nuts
• Two up-pipe-to-turbocharger V-band clamps

Fitment

• 2011–2014 Ford F-250 F-350 F-450 Super Duty Pickup Trucks 6.7L Powerstroke
• 2011–2016 Ford F-350 F-450 F-550 Super Duty Chassis Cab 6.7L Powerstroke

Common Up-Pipe Leak Symptoms

• Dry black soot around the bellows, welds, or flange connections
• Ticking, hissing, or exhaust noise that becomes more noticeable under load
• Slower turbo response, reduced boost, or reduced pulling power
• Increased exhaust gas temperature under comparable operating conditions

These symptoms are reasons to inspect the exhaust system, not proof that the up-pipes are the only fault. Check the exhaust manifolds, turbocharger connections, exhaust backpressure sensor tube, charge-air boots, and intercooler before replacing parts.

Installation Notes

• Preparation: Work on a cold engine and disconnect both negative battery cables. Follow the applicable service procedure for access to the up-pipes; wheel-well access and removal of nearby exhaust components may be necessary.
• Inspection: Clean and inspect the manifold outlets and turbocharger inlet connections. Check the exhaust backpressure sensor tube and fitting for damage or blockage.
• Assembly: Install the supplied studs, gaskets, pipes, nuts, and clamps. Start the connections loosely and align both pipes before final tightening. Do not use the clamps or fasteners to pull misaligned components into place.
• Final tightening: Follow the applicable torque specifications for the supplied hardware. Avoid twisting or overextending the bellows, and confirm clearance around wiring, hoses, and surrounding components.
• Leak check: Reconnect the exhaust backpressure sensor tube and reinstall the removed components. Start the engine and check for exhaust leaks. After the first drive and a complete cool-down, inspect the connections for fresh soot and confirm clearance.

Related Up-Pipe Kits

For 2015–2019 pickups and 2017–2019 chassis cab trucks, use SL-510-011. For 2020–2026 applications, use SL-510-012.

OEM Cross-References

• Ford: BC3Z-9G437-A / BC3Z9G437A
• Ford: BC3Z-9G437-B / BC3Z9G437B
• Ford: BC3Z-6N640-A / BC3Z6N640A
• Ford: BC3Z-8287-A / BC3Z8287A
• Ford: W716425-S900 / W716425S900
• Ford: W711402-S900 / W711402S900
• Superseded Ford: W714330-S900 / W714330S900

⚠️ Not for Sale in California

Not CARB approved. Not legal for sale or use in the state of California.

1-Year Limited Warranty

This SPOOLOGIC up-pipe kit carries a one-year limited warranty against defects in materials and workmanship from the original purchase date. Contact SPOOLOGIC for return authorization before sending the product for inspection with dated proof of purchase. Approved claims are resolved through repair or replacement at SPOOLOGIC’s discretion. The customer is responsible for all warranty shipping charges. Improper installation, overtightened fasteners, incorrect applications, damage caused by other failed components, environmental corrosion, normal heat discoloration, and cosmetic wear are not covered. Labor, removal, reinstallation, towing, downtime, and replacement gaskets used during subsequent service are excluded, subject to applicable law. See the SPOOLOGIC Warranty Policy for complete terms.