The SPOOLOGIC Pro-Series V-Band Clamp Kit SL-330-060 bundles 1× Cast Iron Elbow to Downpipe clamp and 1× Turbo to Cast Iron Elbow clamp for a complete 2007.5-2018 Dodge Ram 2500 3500 4500 5500 6.7L Cummins V-band joint replacement. Engineered to last a lifetime — stainless from band to latch on every clamp, with no stamped or carbon-steel failure points.

Every clamp in this kit is built from corrosion-resistant 304 stainless steel: a mandrel-formed 304SS band, floating V-segments, a heavy-gauge 304 stainless T-bolt, a flanged stainless lock nut, and a Pro-Series Stainless T-Bolt Latch with Quick-Release Action. The upgraded latch is the critical difference — OEM and budget aftermarket clamps use a thin-gauge stamped sheet-metal latch loop that tears under thermal cycling and clamp tension. That stamped loop is the #1 failure point on factory V-band clamps. The Pro-Series latch eliminates it on every clamp in the kit.

Common V-Band Clamp Failure Symptoms

If your 6.7L 24V Cummins truck is showing any of these symptoms, the factory or budget aftermarket clamps are most likely the cause:

• Latch loop tearing or stretching — the thin-gauge stamped sheet-metal loop on factory and budget clamps tears, lets the T-bolt slip, and the clamp loses tension
• Exhaust or boost leak at the V-band joint — ticking, hissing, or sooting around the clamp under load
• Clamp band stretching or warping from heat cycling — thin OEM bands lose clamping force over time
• Corroded T-bolt or seized nut — non-stainless OEM hardware rusts in place and breaks during service

Complete V-Band Service in One Box

Every joint replaced at the same time means no mixed-old-and-new tension across the exhaust system. Each clamp is application-specific to its joint — no guesswork, no universal-fit compromises. Pro-Series build quality on every clamp, all backed by the same Lifetime SPOOLOGIC Warranty.

What's Included

• (1) SPOOLOGIC Pro-Series V-Band Clamp — Cast Iron Elbow to Downpipe (SL-330-059)
• (1) SPOOLOGIC Pro-Series V-Band Clamp — Turbo to Cast Iron Elbow (SL-330-058)

Fits 2007.5-2018 6.7L Cummins

• 2007.5 – 2018 Dodge Ram 2500 3500 4500 5500 6.7L Cummins

Turbo Applications

• Fits factory HE351VE (2007.5-2018 6.7L Cummins)
• Fits factory HE300VG (2007.5-2018 6.7L Cummins)

Replaces Factory OEM Part Numbers

This kit replaces the following factory OEM and aftermarket cross-reference numbers:

• OEM cross-reference: 3905216, 52121859AD, 68210655AA

Backed by a Lifetime SPOOLOGIC Warranty

Every SPOOLOGIC Pro-Series V-Band Clamp in this kit is designed to last a lifetime. Every component — the mandrel-formed 304SS band, the floating V-segments, the heavy-gauge 304 stainless T-bolt, the flanged stainless lock nut, and the Pro-Series stainless quick-release latch — is built from corrosion-resistant stainless steel with no stamped or carbon-steel failure points. If any clamp fails under normal use, SPOOLOGIC will replace it for the original purchaser — no time limit, no questions.

Features

• Complete V-band clamp kit — every joint covered with Pro-Series build quality
• Pro-Series Stainless T-Bolt Latch with Quick-Release Action on every clamp — replaces the stamped sheet-metal loop that fails on OEM
• Mandrel-formed 304SS bands with floating V-segments — no corrosion, no seizing
• Application-specific clamps — direct-fit for 6.7L 24V Cummins
• Designed to last a lifetime — backed by a Lifetime SPOOLOGIC Warranty