The SPOOLOGIC Pro-Series V-Band Clamp SL-330-052 is the turbo to cast iron elbow clamp for 2003-2007 Dodge Ram 2500 / 3500 5.9L Cummins. Engineered to last a lifetime — stainless from band to latch, with no stamped or carbon-steel failure points.

Every Pro-Series clamp is built from corrosion-resistant 304 stainless steel: a mandrel-formed 304SS band, floating V-segments, a heavy-gauge 304 stainless T-bolt, a flanged stainless lock nut, and a Pro-Series Stainless T-Bolt Latch with Quick-Release Action. The upgraded latch is the critical difference — OEM and budget aftermarket clamps use a thin-gauge stamped sheet-metal latch loop that tears under thermal cycling and clamp tension. That stamped loop is the #1 failure point on factory V-band clamps. The Pro-Series latch eliminates it.

Common V-Band Clamp Failure Symptoms

If your 5.9L 24v Cummins truck is showing any of these symptoms, the factory or budget aftermarket clamp is most likely the cause:

• Latch loop tearing or stretching — the thin-gauge stamped sheet-metal loop on factory and budget clamps tears, lets the T-bolt slip, and the clamp loses tension
• Exhaust or boost leak at the V-band joint — ticking, hissing, or sooting around the clamp under load
• Clamp band stretching or warping from heat cycling — thin OEM bands lose clamping force over time
• Corroded T-bolt or seized nut — non-stainless OEM hardware rusts in place and breaks during service

Why the Pro-Series Latch Outlasts OEM

OEM and budget aftermarket V-band clamps cut cost on the smallest part of the clamp — the latch loop that the T-bolt hooks through. That single stamped sheet-metal loop carries the full clamping load and is the first thing to fail. The SPOOLOGIC Pro-Series latch is built from solid heavy-gauge stainless with quick-release action, designed to outlast the truck itself.

Features

• Pro-Series Stainless T-Bolt Latch with Quick-Release Action — replaces the stamped sheet-metal loop that fails on OEM clamps
• Mandrel-formed 304SS band with floating V-segments for even clamping force
• Heavy-gauge 304 stainless T-bolt and flanged stainless lock nut — no corrosion, no seizing
• Application-specific — direct-fit turbo to cast iron elbow clamp for 5.9L 24v Cummins
• Designed to last a lifetime — backed by a Lifetime SPOOLOGIC Warranty

What's Included

• (1) SPOOLOGIC Pro-Series V-Band Clamp — Turbo to Cast Iron Elbow

Fits 2003-2007 5.9L Cummins

• 2003 – 2007 Dodge Ram 2500 3500 5.9L Cummins

Turbo Applications

This clamp fits the following factory turbocharger:

• Holset HE351CW (2003-2007 5.9L 24V Cummins)

Replaces Factory OEM Part Numbers

• Mopar / Cummins: 3535399

Backed by a Lifetime SPOOLOGIC Warranty

Every SPOOLOGIC Pro-Series V-Band Clamp is covered by a Lifetime Warranty against defects in materials and workmanship for the original purchaser. To initiate a warranty claim, the clamp must first be shipped back to SPOOLOGIC at the customer's expense for inspection. If SPOOLOGIC determines the clamp is defective in materials or workmanship, a replacement will be shipped at SPOOLOGIC's cost — no time limit, no questions. Warranty does not cover damage from improper installation, over-torquing, impact, use outside the listed fitment, or exhaust modifications that exceed the clamp's operating parameters. Warranty does not cover labor, downtime, or any other costs outside the clamp itself.