SPOOLOGIC Turbo Mounting Gasket Kit

The SPOOLOGIC SL-310-015 Turbo Mounting Gasket Kit provides gaskets, molded seals, O-rings, and hardware for 2015–2019 Ford 6.7L Powerstroke pickups and the chassis-cab applications listed below. Use the set when removing and reinstalling the original-style turbocharger and the surrounding connections opened during that service.

Features

• Exhaust flange and turbo mounting gaskets supplied together
• Eleven green O-rings and molded seals in the pictured profiles
• Includes bolts, loose washers, and three sealed fasteners
• Replacement sealing components for turbocharger reinstallation

Sealing and Service

Turbocharger access can require opening exhaust, intake, and oil connections. Replacing the disturbed seals helps restore those joints after service. Match each gasket and molded seal to its original location, and inspect the flanges and seal grooves before reassembly.

What's Included

• 2 Triangular Three-Bolt Exhaust Flange Gaskets
• 2 Oval Two-Bolt Flange Gaskets
• 1 Turbo Mounting Gasket
• 1 Elongated Oil-Passage Gasket
• 5 Small Green O-Rings
• 6 Additional Green Seals: 3 round and 3 shaped
• 3 Fasteners with Orange Seals
• 3 Additional Bolts
• 3 Loose Washers

Fitment

• 2015–2019 Ford F-250 F-350 F-450 Super Duty pickup trucks — 6.7L Powerstroke
• 2017–2019 Ford F-350 F-450 F-550 Super Duty chassis cab — 6.7L Powerstroke

Installation Notes

• Preparation: Clean the mating surfaces and keep debris out of open passages.
• Inspection: Repair damaged flanges, grooves, or lines before reassembly.
• Placement: Match each seal to its connection and keep it seated during assembly.
• Tightening: Follow the factory service procedure and torque specifications.
• Leak check: Inspect the serviced connections after installation.

OEM Cross-References

• Ford: BC3Z-6N640-A / BC3Z6N640A — exhaust inlet flange gasket

The numbers above identify individual gasket applications, not the entire SPOOLOGIC kit. Confirm the installed turbocharger configuration if the vehicle has been converted.

1-Year Limited Warranty

This SPOOLOGIC gasket set carries a one-year limited warranty against defects in materials and workmanship from the original purchase date. Contact SPOOLOGIC for return authorization before sending the product for inspection. Approved defective gaskets will be replaced at SPOOLOGIC’s discretion. The customer is responsible for all warranty shipping charges. Damage from improper installation, incorrect application, contamination, or normal wear is not covered. Labor, removal, reinstallation, towing, and downtime are excluded, subject to applicable law. See the SPOOLOGIC Warranty Policy for complete terms.