

SPOOLOGIC Mass Air Flow (MAF) Sensor
SKU # : SL-600-001
2003-2007 Ford F-Series 6.0L Powerstroke
2003-2005 Ford Excursion 6.0L Powerstroke
- In Stock
- Calculated at checkout
- ITEM NO : 1230
California Residents: Prop 65 Warning | WARNING: Cancer and Reproductive Harm
Visit: www.p65warnings.ca.gov
The SPOOLOGIC SL-600-001 Mass Air Flow Sensor is designed for 2003–2007 Ford Super Duty and 2003–2005 Excursion trucks equipped with the 6.0L Powerstroke. It supplies the airflow feedback the engine controller uses to evaluate fresh-air delivery and air-system operation.
Features
- Brand-new mass air flow sensor
- Measures filtered intake air mass
- Factory-style electrical connection and mounting
- Provides airflow feedback to the original engine-management system
What's Included
- 1 SPOOLOGIC Mass Air Flow Sensor — SL-600-001
Fitment
- 2003-2007 Ford F-250 F-350 F-450 F-550 6.0L Powerstroke
- 2003-2005 Ford Excursion 6.0L Powerstroke
MAF Sensor Operation
The MAF measures incoming fresh-air mass in the filtered intake tract. On the 6.0L Powerstroke, this information is particularly useful to EGR flow monitoring. A biased reading can disrupt air-management calculations, but poor performance or an EGR code alone does not establish a failed MAF.
Common MAF Sensor Fault Codes
- P0101: MAF range/performance: measured airflow does not agree with the PCM’s expected airflow.
- P0103: MAF circuit high input: inspect the sensor circuit and connector before replacing the sensor.
- P1102: MAF below the expected in-range minimum on applicable Ford calibrations.
Code availability varies by model year and calibration. A stored code identifies a condition to diagnose; it does not prove the component has failed.
Diagnose Before Replacing
Inspect the air filter, airbox seal, sensor connector, and intake ducting before replacement. Check for damaged terminals, wiring rub-through, oil contamination, and leaks downstream of the MAF. Compare live airflow with engine speed, load, boost, and EGR command instead of judging the sensor from a single idle reading. Check EGR operation when airflow is electrically valid but fails a plausibility test.
Installation Notes
Switch the ignition off before disconnecting the sensor. Keep the sensing element clean and untouched, install it in the correct airflow orientation, and seal the intake connections. After the repair, clear stored faults and complete any model-specific adaptation or verification procedure.
OEM Cross-References
- Ford: 3L3Z-12B579-AB / 3L3Z12B579AB
- Ford: 3L3Z-12B579-ARM / 3L3Z12B579ARM
- Motorcraft: AFLS-181-RM / AFLS181RM
1-Year Limited Warranty — No Returns
This SPOOLOGIC electrical component is covered by a 1-Year Limited Warranty against defects in materials and workmanship. Electrical components are non-returnable. Warranty claims require prior authorization and return of the component for inspection. See the SPOOLOGIC Warranty Policy for coverage, exclusions, and claim procedures.
See why Customers Love Spoologic
5/18/2022

Great Parts
It was just what I needed. It took care my idling issues
Was This Review Helpful?
0 04/12/2019