SPOOLOGIC Manifold Absolute Pressure (MAP) Sensor

The SPOOLOGIC SL-600-014 Manifold Absolute Pressure Sensor is designed for 2011–2019 Ford Super Duty trucks equipped with the 6.7L Powerstroke. It supplies manifold-pressure feedback for the engine’s load calculations and boost-monitoring strategy.

Features

• Brand-new manifold absolute pressure sensor
• Measures absolute intake manifold pressure
• Factory-style electrical connection and mounting
• Provides pressure feedback for engine-load and boost monitoring

What's Included

• 1 SPOOLOGIC Manifold Absolute Pressure Sensor — SL-600-014

Fitment

• 2011-2019 Ford F-250 F-350 F-450 F-550 6.7L Powerstroke

MAP Sensor Operation

The MAP sensor supplies manifold-pressure feedback for air-management and boost monitoring. Absolute pressure includes atmospheric pressure: a MAP reading is not the same as gauge boost. Incorrect pressure data can affect engine response, but a charge-air leak or control problem can produce similar symptoms.

Common MAP Sensor Fault Codes

• P0107 / P0108: MAP circuit low/high input; these are electrical signal faults, not direct measurements of low or high boost.
• P0069: MAP/barometric pressure correlation.
• P0236: Boost-pressure sensor range/performance on applicable 6.7L calibrations.

Code availability varies by model year and calibration. A stored code identifies a condition to diagnose; it does not prove the component has failed.

Diagnose Before Replacing

With the key on and engine off, compare absolute manifold pressure with local barometric pressure using the factory tolerance. Inspect the pressure passage, connector, reference supply, signal return, and signal circuit. If pressure data is believable but boost is low under load, check the charge-air system and turbocharger rather than assuming the sensor is defective. Resolve shared reference-voltage faults before condemning an individual sensor.

Installation Notes

Keep debris out of the pressure port and intake opening. Inspect the seal or hose connection, use the application-specific tightening procedure, and verify live pressure after installation. Do not apply compressed shop air to the sensing element.

OEM Cross-References

• Ford: BC3Z-9F479-A / BC3Z9F479A
• Ford: BC3Z-9F479-B / BC3Z9F479B

1-Year Limited Warranty — No Returns

This SPOOLOGIC electrical component is covered by a 1-Year Limited Warranty against defects in materials and workmanship. Electrical components are non-returnable. Warranty claims require prior authorization and return of the component for inspection. See the SPOOLOGIC Warranty Policy for coverage, exclusions, and claim procedures.