SPOOLOGIC Exhaust Manifold Gasket Kit

The SPOOLOGIC SL-310-081 is a replacement exhaust manifold gasket kit for 2019–2024 Ram trucks equipped with the 6.7L Cummins. Designed for exhaust manifold replacement and related turbo service, it renews the manifold, exhaust, oil and coolant seals disturbed during the repair, helping prevent leaks after reassembly.

Features

• Renews the seals at all six exhaust manifold ports
• Reseals the turbo flange, exhaust outlet and oil drain connections
• Replaces inner and outer O-rings at both oil-feed fittings
• Includes both lower oil-drain tube O-rings
• Provides coolant-line sealing washers for both ends of the lines
• Includes VGT actuator gaskets and removable installation guide pins

What’s Included

• 6 Exhaust Manifold Gaskets — Cummins 5447591 / Mopar 68419703AA
• 1 Turbo Flange Gasket — Cummins 5339363 / Mopar 68450922AA
• 1 Turbo Oil Drain Gasket — Cummins 5264568 / Mopar 5183354AB
• 1 Turbo Exhaust Outlet Gasket — Mopar 68437471AA
• 2 Oil-Feed Fitting Inner O-Rings — Cummins 3922794 / Mopar 5011921AA
• 2 Oil-Feed Fitting Outer O-Rings — Cummins 3037236 / Mopar 5016648AA
• 2 Turbo Oil-Drain Tube-to-Block O-Rings — Cummins 3928624 / Mopar 68003277AA
• 1 VGT Actuator Gasket — Cummins 4045389
• 1 VGT Actuator Gasket — Cummins 4045390
• 8 Turbo Coolant-Line Sealing Washers — Cummins 3963991 / Mopar 68014997AA
• 2 Long Bolts
• 2 Short Bolts
• 2 VGT Actuator Installation Guide Pins (temporary tools)
• 1 Cable Tie

OEM part numbers are provided for cross-reference only. This kit contains SPOOLOGIC replacement parts, not genuine Cummins or Mopar parts.

Fitment

• 2019–2024 Ram 2500 3500 — 6.7L Cummins
• 2019–2024 Ram 4500 5500 chassis cab — 6.7L Cummins

The 2019–2024 turbo flange gasket differs from the 2007.5–2018 gasket.

Installation Notes

Clean and inspect all mating surfaces. Match the O-rings, sealing washers and gaskets to their connections. Use the two guide pins to position the VGT actuator, then remove them and install the mounting bolts. Follow the applicable factory service procedure for tightening sequence and torque, and check all serviced exhaust, oil and coolant connections for leaks.

Related Parts

For the six manifold gaskets alone, see SL-310-076 Exhaust Manifold Gasket Set.

For the turbo gasket kit without the six exhaust manifold gaskets, see Turbo Gasket Kit — SL-310-074.

OEM Cross-References

• Cummins 5447591 / Mopar 68419703AA — Exhaust Manifold Gaskets
• Cummins 5339363 / Mopar 68450922AA — Turbo Flange Gasket
• Cummins 5264568 / Mopar 5183354AB — Turbo Oil Drain Gasket
• Mopar 68437471AA — Turbo Exhaust Outlet Gasket
• Cummins 3922794 / Mopar 5011921AA — Oil-Feed Fitting Inner O-Rings
• Cummins 3037236 / Mopar 5016648AA — Oil-Feed Fitting Outer O-Rings
• Cummins 3928624 / Mopar 68003277AA — Turbo Oil-Drain Tube-to-Block O-Rings
• Cummins 4045389 — VGT Actuator Gasket
• Cummins 4045390 — VGT Actuator Gasket
• Cummins 3963991 / Mopar 68014997AA — Turbo Coolant-Line Sealing Washers

1-Year Limited Warranty

This SPOOLOGIC gasket set carries a one-year limited warranty against defects in materials and workmanship from the original purchase date. Contact SPOOLOGIC for return authorization before sending the product for inspection. Approved defective gaskets will be replaced at SPOOLOGIC’s discretion. The customer is responsible for all warranty shipping charges. Damage from improper installation, incorrect application, contamination, or normal wear is not covered. Labor, removal, reinstallation, towing, and downtime are excluded, subject to applicable law. See the SPOOLOGIC Warranty Policy for complete terms.